What is lab shaker?
Lab shakers are widely used in fixation of electrophoretic gel separation bands, shaking during Coomassie brilliant blue staining and destaining, fixation, staining, and development of silver nitrate staining, development, and fixation of X-ray film in autoradiography experiments, electrophoresis Further processing of cellulose membrane after the transfer, reaction and staining of antigens, molecular hybridization, cell culture, etc. Shakers can be used for experiments where samples need to be shaken in solution.
What are the advantages of NOKI's lab shaker?
1. The brushless DC motor is controlled by a microcomputer, and the intelligent feedback control greatly improves the speed control accuracy and is not affected by the fluctuation of the power supply voltage.
2. Gradual speed-up start-up avoids sample liquid splashing and sample damage caused by sudden high-speed start-up, and at the same time prolongs the life of mechanical parts.
3. If the external power supply is suddenly cut off and the incoming call is repeated, the instrument can automatically resume operation according to the original setting.
4. When overloaded, the instrument will automatically stop to ensure the life and safety of the instrument.
5. The LED digital display screen is used to display the set parameters and measured parameters.
6. The control system ensures that the instrument starts smoothly, accelerates smoothly, and ensures the uniform movement of the experimental sample.
7. Brushless DC motor, long-life design, maintenance-free.
8. Wide voltage adaptation range, can be used in the range of AC90-260V.
What are the parameters of the laboratory shaker?
Model | KTS-103H |
---|---|
Oscillation mode | Circular oscillation |
Amplitude / Range | Horizontal 360°/Φ30mm |
Rotational speed (frequency) | 0-240rpm |
Worktable material | Rubber tray |
Timing range | 0-99h60min/continuous |
Power | 30W |
External dimensions | 330×480×160mm |
Table size | 320×265mm |
Note:The above data were measured at ambient temperature (QT) 25℃ without load in the working room.