Laboratory blast drying oven, also known as oven, adopts an electric heating method for blast circulation drying test, which is divided into blast drying and vacuum drying.
A vacuum pump is used to extract the air in the box, so that the atmospheric pressure in the box is lower than normal pressure so that the product can be tested in a very clean state. required temperature environment.
A high-temperature drying oven is an oven with a temperature higher than 300 degrees Celsius, called a high-temperature oven. Because when the oven temperature is higher than 300 degrees Celsius, it has great requirements on the material of the oven itself.
Since the movement of the gas becomes difficult to control at high temperatures, the high-temperature oven puts forward higher requirements for the uniformity control of the temperature, which is much higher than that of the low-temperature oven.
When the nitrogen-filled oven is working, the working chamber is filled with inert gas CO2 or N2 to form a high temperature, low oxygen (oxygen-free), or clean environment (oxygen-free clean oven) to prevent the material from being oxidized during baking.
Nitrogen-filled ovens are widely used in electronic liquid crystal display, LCD, CMOS, IS, medicine, laboratory, and other fields.
The natural convection oven utilizes the natural convection phenomenon of hot air rising, and has the characteristics of no noise, less dust, and slow airflow.
The natural convection oven is suitable for drying, baking, wax melting, and sterilization in industrial and mining enterprises, laboratories, scientific research units, etc.
The vacuum drying oven is specially designed for drying heat-sensitive, easily decomposed, and easily oxidized substances, and can maintain a certain degree of vacuum in the workroom during work.
Inert gas can be filled into the interior, especially some articles with complex components that can be dried quickly, and an intelligent digital temperature controller is used to set, display and control the temperature.
The lab far-infrared drying box is made of angle steel, Pu steel plate, and stainless steel plate. Aluminum silicate fiber is filled between the shell and the studio for heat preservation.
The far-infrared radiation heater is installed at the bottom or on both sides of the studio. This type of drying box equipped with a blast system can effectively improve the temperature uniformity in the working room.